Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
1. Starting the product
Before you start the product:
•
Turn the water supply on.
•
Pull the spray gun trigger to release air
pressure.
•
If a stable stream of water comes into view,
release the spray gun trigger.
•
Install battery pack as previously described.
•
Press the button (C) once to start the product.
•
Turn the water supply on.
•
Pull the spray gun trigger.
WARNING
Make sure that all the connections are tight and
have no leakage before operation.
CAUTION
Do not operate without the water supply
connected.
Water exiting the water outlet as the pressure
washer primes is normal. This is needed to bleed
the air from the system.
2a. Using the spray gun
To start:
•
Push the spray gun trigger safety lock-out up
and into its original position.
•
Pull and hold the spray gun trigger to start the
product.
1
C
2a
14
Publicidad
