5. Press
to locate the desired digit and re-enter, or press the ERASE
button to clear all three digits and re-enter new digits.
6. Press OPTIONS again to store the area code and return to the LOCAL
AREA CODE display.
S
R
ETTING
EGIONAL
Like the Local Area Code, the telephone uses the programmed area codes
to determine the number format to display when a valid Caller ID signal is
received. Calls that match any of the programmed regional area codes are
displayed as 10 digits. This is helpful in areas that have multiple or
overlapping area codes and require 10-digit dialing.
IMPORTANT: If your area code does not require 10-digit dialing, you can skip
this feature.
1. Press the OPTIONS button. OPTIONS or shows in the display.
2. Press
button until 10-DIGIT AC'S shows in the display.
3. Press the OPTION button again. 10-DIGIT AC'S-1 and the first three sets
of regional area codes shows in the display. If you want to edit the
second three sets, press OPTIONS until 10-DIGIT AC'S-2 shows in the
display. Then the second three regional area codes show in the display.
4. Use the
button to locate the digit you want to set or change.
5. Use the number keypad (or
automatically advances to the next digit of the regional area code.
6. Press
until you locate the desired digit and re-enter the code, or press
the ERASE button to clear all three digits and enter a new area code.
7. Press OPTIONS again to enter the next three-digit regional area code
and repeat steps 4 to 6 until all the regional area codes are entered.
16
All manuals and user guides at all-guides.com
A
C
REA
ODES FOR
button) to enter the area code. The unit
10-D
D
IGIT
IALING