Axis Communications M1124 Guia De Instalacion página 11

3
4
5
6
7
8
9
10
11
12
LED Indicators
Note
• The Status LED can be configured to be unlit during normal
operation. To configure, go to Setup > System Options > Ports
& Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is
active.
• The Status LED can be configured to flash for identifying the
unit. Go to Setup > System Options > Maintenance .
Status LED
Green
Amber
Note
The Network LED can be disabled so that it does not flash when
there is network traffic. To configure, go to Setup > System
Options > Ports & Devices > LED. See the online help for more
information.
AXIS M11 Network Camera Series
Power connector
Control button
Network connector
Power LED
Status LED
Network LED
microSD card slot
Iris connector
I/O connector
²
¼ Screw mount
Indication
Steady green for normal operation.
Steady during startup and when
restoring settings.
11