AENO EK1S Guia De Inicio Rapido página 10

Table vinegar
and leave it for 1 hour
without boiling. Pour
out the contents, wash
the kettle by pouring
and draining water 5–
6 times
Troubleshooting
 The kettle won't turn on. Possible reasons: socket malfunction; the kettle is
not placed on the stand. Solution: check the socket by plugging in another
device; place the kettle on the stand.
 The kettle turns off a few seconds after turning on. Possible reason: there
is no water or little water in the kettle. Solution: unplug the kettle. Wait until
it has cooled down and repeat the instructions under the "Operation of the
Device" section.
 Cannot connect the kettle to the app. Possible reason: the smartphone is
too far away from the kettle. Solution: place your smartphone no more than
5 m away from the kettle.
ATTENTION! If none of the suggested methods have solved the problem,
contact your supplier or an authorized service center. Do not disassemble the
device or attempt to repair it yourself.
ASBISC reserves the right to modify the device and to make changes and additions to this
document without prior notice to users. The date of manufacture is indicated on the package.
The warranty period and service life is 2 years from the date of retail sale of the product.
Manufacturer: ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Made
in China. All trademarks and brands mentioned herein are the property of their respective owners.
Up-to-date information and a detailed description of the device, as well as connection instructions,
certificates, information on companies accepting quality claims and warranties, are available for
download at aeno.com/documents.
10
Citric acid
leave it for 15 minutes.
Pour out the contents,
wash the kettle by
pouring and draining
water 5–6 times
Descaling agent
instructions on the
product package
aeno.com/documents