AENO EK1S Guia De Inicio Rapido página 8

7. Wait for the water to boil: you will hear two beeps, and the backlight will turn off.
8. Remove the kettle from the stand and carefully drain the water.
ATTENTION! Do not drink water obtained from boiling the kettle the first two
times.
9. Allow the device to cool down and repeat steps 3–8.
10. After the device has cooled down completely, wipe the exterior and interior
surfaces with a dry cloth.
Operation of the Device
1. Open the lid and fill the kettle with the desired amount of water.
2. Close the lid tightly and place the kettle on the stand. You will hear two
beeps, the backlight will turn on and off, and the indicators will be
continuously on.
 Boiling. Follow steps 6–7 in the "Preparing for the First Use" section.
ATTENTION! Pour water that you need to boil or heat into a cooled down kettle
only.
 Heating while maintaining the selected temperature. Use the
button to select the required temperature and press the
kettle will heat the water to the selected temperature and will maintain
it for one hour.
Note. This mode does not involve boiling water.
Note. Press the
maintaining the temperature. Boiling or heating will also turn off automatically
as soon as the kettle is removed from the stand, temperature maintenance will
turn off 3 minutes after the kettle is removed from the stand.
Remote Control
Note. When connecting the device to the app, it is recommended to stay as
close as possible to the kettle and to the Wi-Fi router, if possible.
1. Fill the kettle with the desired amount of water. Close the lid tightly and
place the kettle on the stand. Insert the plug into the socket.
2. Connect your smartphone to a Wi-Fi network (2.4 GHz).
3. Download the AENO mobile app from Google Play or App Store and register
a new account or log in to your user account.
8
button again to interrupt boiling or heating while
button: the
aeno.com/documents