AENO EK1S Guia De Inicio Rapido página 7

Heating Process
mode
+90 °C Water heating
Temperature
maintenance
+100 °C Water heating
The device is
turned off
* The color of the indicators is light blue.
Functions of Buttons
Button Action
"Start/Stop" button
Press once
Press and
hold
Temperature selection and maintenance button
Press once
Preparing for the First Use
Before using the device for the first time, clean it by doing the following:
1. Open the packaging and remove the device. Remove any packaging
materials.
2. Place the stand on a flat, stable surface.
3. Open the lid of the kettle and fill the device with water up to the "MAX" mark.
4. Close the lid tightly and place the kettle on the stand.
5. Insert the plug into the socket. You will hear two beeps, the backlight will
turn on and off, and the indicators will be continuously on.
6. Press the button twice: after a beep, the water will start heating.
aeno.com/documents
Backlight
Flashing light
blue
On (light blue)
Flashing red
Off
Description
Start boiling or heating water; interrupt boiling,
heating, or temperature maintenance
Activate smartphone pairing mode
Select water heating temperature
Indicators *
Indicator "90" flashes
Indicator "90" is on
Off
Off
7