Publicidad
Idiomas disponibles
Idiomas disponibles
E L E V A T I N G C U L I N A R Y E X C E L L E N C E
INSTALLATION
SET UP OF THE STAND
ANCHORING ON THE MINI STAND
1. Place the Minimax or Minimatic juicer on the stand in the correct position. Fasten the
juicer to the stand using the thumbscrews.
MINI STAND
1. Remove the down tube from the trolley inside the stand and place it in the stand as
shown in the drawing.
ANCHORING ON THE SERVICE / FRIGO / DISPENSER STAND
1. Screw the support thumbscrews to the cabinet to prevent movement and unscrew
the screws on the sides. Place the juicer on the stand making sure that the holes
match and screw the screws to fix the juicer.
DISPENSER STAND
1. Remove the juice tray and the dispenser kit from the trolley inside
the stand.
2. Place the tank on the supports of the dispenser kit. Place the drip
grid on the nipples of the stand door. Place the down tubes and the
trolley on the lower part of the bottom of the stand, as shown in the
drawing.
Page 10 / 72
Publicidad
