Publicidad
Idiomas disponibles
Idiomas disponibles
AUTOMATIC DOUBLE ACTION FILTER
1. Place the tap handle in horizontal position. Remove the
Automatic Filter assembly by sliding it upwards and
pulling it outwards. Remove the drop tubes by sliding them
backwards and pulling them out.
2. Remove the base of the automatic filter by unhooking it
from the two front and rear slots.
3. Remove the rollers that hold the belt by exerting slight
downward pressure on them.
4. Remove the rotating band.
Clean all the parts perfectly, as well as the machine block with
water and detergent.
The parts, with the exception of the cover, can be put in the
dishwasher at a maximum temperature of 40ºC.
Do not use abrasive products or solvents, as they could damage the compound of the elements of the juicer
system. Do not clean the juicer assembly using pressurized water. Dry the components of the squeezing
system and the machine block.
NOTE: When mounting the automatic filter, make sure that the anchoring is done in the correct way. If the
filter does not fit, rotate the rotating band to facilitate fitting.
STAINLESS STEEL SELF-TAP
To ensure perfect hygiene of your juicer, it is essential to clean
the tap regularly.
1. Unscrew the knurled nut that connects the tap to the juicer.
2. Unscrew the knurled thread underneath the actuator.
Clean perfectly all the parts of the tap with water and detergent,
focusing on those areas with more relief with the help of a brush.
Page 17 / 72
E L E V A T I N G C U L I N A R Y E X C E L L E N C E
MAINTENANCE
Publicidad
