Publicidad
Idiomas disponibles
Idiomas disponibles
FRIGO STAND
1. Remove the juice tray and the dispenser kit from the peel
bucket inside the stand.
2. Place the reservoir on the seal of the cooling device. Place the
bowl and the pump cover. Insert the tap piston into the cavity
at the front of the tank and, from the outside, attach the push
handle to the piston. Attach the filter and the tank cover. Also
fit the juice tray.
SET UP OF THE OPTIONS
STAINLESS STEEL SELF-TAP
1. Thread the Stainless Steel Self-Tap assembly to the support.
SELF-CLEANING SYSTEM
1. Connect the juicer to the water supply through the socket at the rear of the machine.
The connection must be made using a G 1/4" female thread. This system is prepared
to work between 1.5 and 3 bars of pressure.
TO ACTIVATE THE JUICER
1. Connect the juicer to a grounded outlet.
2. Activate the juicer by pressing the switch on the back of the juicer.
3. Feed citrus fruit through the feeder tube or into the top basket of the feeder.
4. Turn on the control display by pressing Start for 2 seconds.
Page 11 / 72
E L E V A T I N G C U L I N A R Y E X C E L L E N C E
INSTALLATION
OPERATION
Publicidad
