HSM SECURIO P44c Instrucciones De Servicio página 23

english
11 Scope of delivery
• Paper shredder, ready for connection, in car-
ton packing
• 5 bags for shredded material
• Special cutting block oil (cross cut)
• Operating instructions
12 Technical data
Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Cutting speed
Intake width
Power supply
Power with max. number of sheets
in standby mode
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Weight
Volume of the shredded paper container
Sound pressure level emissions
(Idle running/ load)
Cutting size of the separate CD cutting unit
(optional)
Security level of the CD cutting unit
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or
a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during operation.
The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
** Identifi ed by the letter after the 7-digit order number on the name plate on the back of the machine.
e.g. 1873111C >> cutting size 4 x 7 mm
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2014/35/EU
• EMC directive 2014/30/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
22
Acces so ries
• 25 bags for shredded material,
• Special cutting block oil 250 ml,
• Cardboard box, order No.: 1.870.995.200
See page 224 for our customer service
addresses.
Strip cut
5.8
P-2 / O-2 P-2 / O-2
T-2 / E-2 T-2 / E-2
80 g/m 77 - 79 61 - 63
2
70 g/m 83 - 85 67 - 69
2
230 V, 50 Hz 120 V / 60 Hz 220 V / 60 Hz
Order number +C **
4 x 7 mm
O-4 / T-5 / E-4
HSM SECURIO P44i
order No.: 1.452.995.000
order No.: 1.235.997.403
3.9 3.9 x 40 1.9 x 15
P-4 / O-3 P-5 / O-4
T-4 / E-3 T-5 / E-4
F-1
43 - 45 25 - 27
48 - 50 30 - 32
85 mm/s
400 mm
1 900 W
2 W
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
700 x 592 x 1 125
105 kg
205 l
Silent 45 dB(A) / 50 dB(A)
Standard 55 dB(A) / 60 dB(A)
Performance 65 dB(A) / 70 dB(A)
Strip cut
0.78 x 11 1 x 5
P-6 / F-3 P-7 / F-3
F-2
17 - 19
20 - 22 13
Order number +M, N **
2 x 2 mm
O-6 / T-6 / E-5
12/2016
11