Publicidad
Idiomas disponibles
Idiomas disponibles
10 MALFUNCTIONS
Problem
Connect the machine using the cable (fig.1, n°14).
Unlock the emergency stop (fig.1, n°5).
The machine is not running
Close the cover.
Close the door.
Check whether the blades need replacing (fig.7,8).
The machine is running, but
Leave the bread to cool down for a few hours.
the loaves are damaged or
cut unevenly
Feed in a loaf of the specified size.
Feed in a loaf that is sufficiently firm.
If the blades are misaligned, adjust the blades and frames.
The bread vibrates between
If the blades are misaligned, adjust the blades and frames.
the blades
Check whether the blades need replacing (fig.7,8).
The bread is cut too slowly
Check that the loaf holder springs are in place correctly (fig.10, n°32).
If the blades are misaligned, adjust the blades and frames.
The bread tears
Check that the loaf holder springs are in place correctly (fig.10, n°32).
The bread emerges very
slowly or remains between
Check that the loaf holder springs are in place correctly (fig.10, n°32).
the blades
The bread is squashed
Remove a loaf holder spring and repeat your test (fig.10, n°32).
coming out of the blades
WARNING: The machine must be isolated from the power supply before attempting any work on it.
Should the problem persist, please contact your technician.
Check
15
English
11 ERROR CODES
11.1 Machines equipped with a digital display (MRK – MRK ETL – MRF – MRL – MRL ETL – MRM –
MRC)
Message displayed on screen
STOP! CHECK PHOTOELECTRIC
CELL
Photoelectric cell (S5) beams broken
DRAWER STOP OPEN
Crumb tray (S7) open
CLOSE DRAWER
MOTOR OVERHEATING STOP
Blade motor thermal cut-out (F3)
WAIT!!!
tripped
PRESS START TO
Loaf pusher not in initial position (S1)
REPOSITION THE MACHINE
COVER OPEN
Safety cover open (S6)
CLOSE COVER
FILL CUTTING OIL TANK
Oil top-up required in loaf pusher
0 CUTS REMAINING BEFORE
Blade replacement required.
BLADE REPLACEMENT
Should the problem persist, please contact your technician.
English
Problem description
Action
Please restart the
machine using the
emergency stop (fig.1,
n°10). Should the
problem persist, please
contact your technician.
16
Publicidad
