Uline DOWNTOWN H-11437 Instrucciones De Montaje página 2

1. Insert three cam lock pins (A) and two dowels (C)
into the left side panel (1). Repeat on right side
panel (2). (See Figure 1)
Figure 1
2
IMPORTANT! Cam lock pins must be tightened
once inserted into panel. Grasp lower part of
cam lock pin and tighten using a Phillips head
screwdriver.
TIGHTENING OF CAM LOCK PINS
2. Insert six cam locks (B) into back side of
back panel (4). (See Figure 2)
Figure 2
4
PAGE 2 OF 12
C
1
Hold when
tightening
B
ASSEMBLY
3. Attach side panels (1 and 2) to back panel (4).
Tighten cam locks (B) on back side of back panel
using Phillips screwdriver. (See Figures 3-4)
NOTE: Top edges of side and back panels
include holes.
Figure 3
A
2
Figure 4
IMPORTANT! Turn cam lock ¼ to the right to lock.
Ensure the arrow is pointing to the edge of the
panel before inserting into the panel's hole.
IMPORTANT! FUNCTION OF CAM LOCK
Ensure the arrow is pointing toward edge of
panel before inserting into the panel's hole.
4
1
4
4
B
1/4 RIGHT TURN
FOR LOCKING
1
0224 IH-11437