Publicidad
Idiomas disponibles
Idiomas disponibles
4. Insert six cam lock pins (A) and six dowels (C) into
top panel (3). Insert six cam locks (B) into side panels
(1 and 2) and back panel (4). Attach top panel (3)
to the cabinet body and tighten cam locks using a
Phillips screwdriver. (See Figure 5)
NOTE: Once cam locks are tightened,
cam lock caps (D) can be applied for a
finished look.
Figure 5
3
4
1
IMPORTANT! The following steps require an
assembled H-6304GR Lateral File Cabinet
or H-6859GR Storage Cabinet. Ensure the
cabinet is placed near desired location before
proceeding, but leave enough room to access
the back of the unit.
5. With a second person, place hutch down on a
smooth surface. Remove liner from double-sided
tape on the bottom of each side panel (1 and 2).
(See Figure 6)
Figure 6
1
PAGE 3 OF 12
ASSEMBLY CONTINUED
3
A
C
2
D
B
2
6. With a second person, carefully lift and place
bookcase hutch on top of cabinet to ensure
proper alignment at rear of cabinet. (See Figure 7)
Figure 7
0224 IH-11437
Publicidad
