Nebula Capsule II Manual De Instrucciones página 24

Troubleshooting
① Capsule II fails to power on using the remote control.
Press and hold
•
turn it on.
When powered off, you cannot use the remote control
•
to turn it on.
② The remote control doesn't work.
Make sure the battery is already installed in the remote
•
control.
Replace the batteries.
•
③ Images become blurred.
Slightly move the projector to engage autofocus.
•
Press and hold
•
the focus.
④ Capsule II is unable to connect to a Wi-Fi network.
• Refresh the list of available networks and retry.
• Reboot the wireless router or the device and retry.
⑤ How do I update firmware?
When a new version is detected you will be asked to
•
reboot and update.
22
for 2 seconds on the projector to
for 3 seconds to manually adjust