Publicidad
English
1. The Quad 34 watt/6.8A 4-USB port charger can charge
most phones, tablets, and other USB-powered devices.
2. Smart USB ports deliver the appropriate charge to the
device connected to it. 12 watts/2.4A of charging power
to tablets, 5 watts/1.0A or similar to phones. A total of
34 watts/6.8A means you can charge up to 2 tablets + 2
phones, 1 tablet + 3 phones, 4 phones, or 4 other devices.
3. Using your charging cable, connect your device to any of
the four charging ports. Charging cables not included.
4. Connect up to four devices at the same time.
Safety Precautions
Do not get THE QUAD or any related accessories wet. If they get wet,
discontinue use immediately.
Do not use THE QUAD in any way not described in this manual.
Do not open or disassemble THE QUAD.
Do not allow children to play with THE QUAD.
This Class B digital apparatus complies with
CAN ICES-3(B) / NMB-3(B).
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Product should be used in an environment where temperature is below 30°C.
This product is a class II device.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help. The
socket-outlet shall be installed near the equipment and shall be easily
accessible.
Designed by Blueflame Technologies in Boston. Made in China. Blueflame
Technologies LLC. 745 Boylston Street, Boston, MA 02116 USA. Blueflame,
the Blueflame Logo, and Your Universe Connected. Beautifully. are
trademarks of Blueflame Technologies LLC. ©2014 Blueflame Technologies
LLC. All Rights Reserved. Colors and specifications depicted on packaging
may vary slightly from product.
BLUEFLAMEGEAR.COM
01
Publicidad
