Publicidad
Idiomas disponibles
Idiomas disponibles
4 Installation of Colposcope
4.1 Contents of Box
•
1 Colposcope
•
1 Power adaptor
•
1 Plug (US, UK, EU, AUS)
•
1 Plastic Dust Cover
•
1 Instructions for Use
•
1 Phillips Screwdriver
4.2 Removing the Colposcope from the Box
The colposcope comes with a one year warranty with free repairs (shipping not included).
Please keep this box and the protective foam for at least a year; should you need to return it to
ALLTION for any warranty repairs. Otherwise there will be a nominal fee for us to send you a new
box.
•
During the handling and unpacking, the box must be placed in the up position according to
the arrows that are printed on the outer box.
•
Remove top protective material.
•
Grasp the colposcope at the center post (A cutout in the foam for your hands is provided.)
and lift the colposcope straight out of the protective material. Note: When removing the instrument
out of the protective foam, remove with care to prevent the instrument from being damaged.
4.3 Setting up the Colposcope
A. Remove the power adapter from the shipping box.
B. Insert the power adapter into the DC plug located at the back end of the base.
C. Insert the other end of the power adapter into the wall socket.
D. Depress the power on/off button with your right foot, to turn on the power. The power indicator
light will come on at that time.
E. Important: Rotate the Rheostat Knob to turn on the Viewing Light.
F. When the instrument is ready to be shut off, simply depress the power on/off button with your
right foot. The power indicator light will go off
12
Publicidad
