Alltion AC-1000 Serie Manual Del Usuario página 18

To Adjust the IPD
A. Turn on power by pressing the foot-switch on the base. On/off indication light will come on.
B. Turn the black Rheostat Knob on the left to adjust the light intensity. Light will project from upper part
of the Colposcope.
C. Gently place your eyes against the black rubber eyepieces. Grasp the tan metal housing with both hands.
Gently rotate the barrels together or apart. A singular circular image should be seen through both eyepieces.
This adjustment is similar to adjusting the eyepieces of binoculars.
6B
6C
7 Adjustment of the Diopter Knobs
Focusing the Colposcope
A. Set the Diopter Knobs at zero.
B. Turn the Colposcope on, place your eyes against the eyepieces,
and focus the Colposcope on a fixed object until that object appears
clear and sharp.
C. It is recommended to focus on letters such as a book or a
magazine.
D. Close your right eye. With your left hand, rotate the Diopter
Knob until the object is clear and sharp for your left eye. Note: The
Diopter allows you to adjust for plus and minus vision corrections.
E. Then close your left eye. With your right hand, rotate the
diopter knob until the object is clear and sharp for your right eye.
Note: The Diopter allows you to adjust for plus and minus vision
corrections.
Rheostat
Knob
14