BH FITNESS G6508 Manual Del Usuario página 18

-CALORIES:
estimated number of calories that
have been burnt off up until now. This
calculation is based on the energy
being produced and the weight and
age values provided by the user.
-INCLINATION:
machine's current level of inclination.
The machine
inclination (0 to 15). The degree of
inclination can be changed by using
the incline Λ Λ Λ Λ and incline V V V V keys. At
the end of the exercise the machine
returns to a 0 inclination level.
-PULSE: This shows the user's heart
rate, assuming that this information
can be accessed through the hand-
grip sensors or the telemetric chest
band. When both of these are used
together, priority is given to the
telemetric chest band. For more
information about heart rate refer to
the section
measurement; chest band and hand-
grip.
KEYPAD (Fig.3).
The function of each key is listed
below.
This electronic monitor features a
simple easy-to-use
keypad consists of: (D) program keys;
MP3 connection socket; (E) Fan; (F)
Function keys; (G) Number keys.
(D). – Program
Program 2; Program 3; Program 4;
Program 5; Program 6; Program 7;
Program 8; User program (User); Test
Man program; Test Woman program;
H.R.C (Heart Rate Constant) program.
Audio socket, MP3 socket.
This shows
This displays
has 15 levels
entitled:
keypad.
keys.- Manual;
the
(E)
(Minimum speed); High (Maximum
speed).
(F)
pause; reset; down▼; enter; up▲;
incline Λ Λ Λ Λ ; incline V V V V; stop; quick /
the start; speed
select a particular exercise, enter
of
requested
exertion levels and to finish the
exercise.
(G)
used to enter the data requested by
the monitor.
-cool down.- Gradual decrease key
When the speed exceeds 10 km/h,
pressing the key will slow the speed
down by 40% over 40 seconds. When
this time has elapsed, the speed will
drop by 40% over 40 seconds. When
this time has elapsed, the speed will
drop by 50% over 30 seconds. Once
Pulse this time is up, the machine will stop.
When the speed is less than10 km/h,
pressing the key will slow the speed
down by 50% over 30 seconds. When
this time has elapsed, the speed will
drop by 50% over 30 seconds. Once
this time is up, the machine will stop.
-reset.- Reset key. This is used to
erase the data that have been entered
The
into the monitor when selecting a
program.
-speed –.- Key for decreasing speed.
When pressed during exercise this
key will decrease the speed of the
machine by one tenth of a kilometre
per hour. The speed will continue to
decrease as long as this button is
being pressed. During the selection of
pre-programmed profiles, it is used to
move back to the previous profile
screen.
18
- Fan keys – Off / On; Low
- Function keys– cool down;
; speed – – – – . Are used to
data, control
- Numeric keys.- (1- 0) are
exercise