Waeco AirCon Service Center BMW 2500G Instrucciones De Uso página 110

Operation
12. Connect the components for flushing to the service ports (13)
and (14) of the AirCon Service Center using special adapters and in
accordance with the manufacturer's specifications to form a flushing
circuit.
13. In the basic menu, use the cursor keys  or  to select "Other
selections":
14. Press ENTER to confirm.
15. Use the cursor keys  or  to select "Flushing":
16. If necessary, use the keypad (8) to enter the data and press ENTER
to confirm. If no data is to be entered, press ENTER to switch to the
next program step.
17. Use the cursor keys  or  to select whether to flush the entire air
conditioning system or just individual components:
18. Press ENTER to confirm.
19. Follow the instructions in the display.
✓ After flushing is completed, the basic menu for the
AirCon Service Center appears.
20. If necessary, remove the adapter from the flushing circuit and recon-
nect all the components to the refrigerant circuit.
Fit the connections of the AirCon Service Center to the vehicle air
conditioning system and open them.
21. In the basic menu, use the cursor keys  or  to select "Free
selection":
22. Press ENTER to confirm.
23. If necessary, use the keypad (8) to enter the data and press ENTER
to confirm.
If no data is to be entered, press ENTER to switch to the next
program step.
110
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
Full flushing
Fast flushing
ENTER-OK STOP-EXIT
Short selection
Free selection
Other selections
ENTER-OK
BMW 2500G
EN