Pride Mobility MID-SIZE Serie Manual Del Proprietário página 27

Seat Height Adjustment
The seat can be repositioned to several different
heights. See fi gure 17.
1. Remove the seat and/or shroud from your scooter.
See VI. "Disassembly and Assembly."
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
align the adjustment holes of the upper and lower
seat posts.
5. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat
posts.
6. Reinstall the nut onto the seat height adjustment
bolt and tighten.
7. Reinstall the shroud and the seat.
Seat Height Adjustment—Comfort Seat Post
(if available)
To reposition the seat to one of two different heights:
1. Remove the seat from your scooter. Push forward
or pull upward and hold the seat rotation lever to
disengage the seat, then rotate the seat and lift it off
of the scooter.
2. Remove the rear shroud.
3. Push up the seat post boot to uncover the hardware.
4. Push down on the seat post while loosening and
removing the shoulder bolt, washer, and nut. See
fi gure 18.
5. Remove the comfort spring.
6. To raise the seat to the top most mounting hole, insert
the height adjustment spacer. To lower the seat to the
lowest mounting hole, remove the height adjustment
spacer.
7. Reinstall the comfort spring.
8. Hold the upper seat post at the desired height and
match up the locating holes in the lower seat post.
Utilize the top holes for the upper position or the
bottom holes for the lower position.
NOTE: When the seat post is mounted in the upper
position, you must utilize two spacers.
9. Press down on the seat post while reinstalling the
hardware and tightening to 210 in • lb (24 N • m).
10. Replace the rear shroud and the seat.
Mid-size Scooter Series
V. C O M F O R T A D J U S T M E N T S
IDENTIFICATION KEY
1. UPPER SEAT POST
2. NUT
3. SEAT HEIGHT ADJUSTMENT BOLT
4. LOWER SEAT POST
1
3
4
Figure 17. Seat Height Adjustment
IDENTIFICATION KEY
1. BOOT
2. UPPER SEAT POST
3. COMFORT SPRING
Weight Capacities: 0-220 lbs. (0-90.72 kg)
4. SPACER
5. SHOULDER BOLT (210 in • lb [24 N • m])
6. LOWER SEAT POST
7. WASHER
8. NUT
1
2
3
4
5
6
Figure 18. Seat Height Adjustment - Comfort Seat Post
2
220-400 lbs. (90.72-181.44 kg)
8
7
27