Publicidad
Idiomas disponibles
Idiomas disponibles
Dock Arm x 1
1.
Secure dock arm mounting bracket to solid surface
from which fan will be hung. Mounting holes are in
each corner of mounting bracket. Secure to surface
using suitable hardware (not included). (See Figure 8)
PAGE 4 OF 15
DOCK ARM PARTS
1/2" Bolt x 1
5/16" Shoulder Bolt x 1
Self-Tapping Screw x 5
DOCK ARM ASSEMBLY
Figure 8
Mounting bracket
Hardware Kit
Washer x 1
5/16" Locknut x 1
2. Secure the yoke to dock arm by inserting the
1/2" bolt through the hole in the dock arm and the
center hole in the yoke. Insert washer onto 1/2" bolt
prior to yoke. Secure with 1/2" locknut and tighten
using 19 mm wrench. (See Figure 9)
Figure 9
Dock Arm
1/2" Locknut x 1
Jiffy Clip x 5
1/2" Bolt
Yoke
1/2" Locknut
0524 IH-9924
Publicidad
