Uline H-9924 Manual Del Usuario página 5

SECURE POWER CORD
3. Secure fan power cord to dock arm with jiffy clips over
the power cord. Align jiffy clips with pre-drilled holes
on dock arm. Secure jiffy clips to dock arm using
self-tapping screws and drill with 5/16" nut driver bit.
(See Figure 10)
Figure 10
PAGE 5 OF 15
DOCK ARM ASSEMBLY CONTINUED
Jiffy Clips
1-800-295-5510
uline.com
STOP BOLT (OPTIONAL)
4. To prevent fan from rotating 360°, insert a
5/16" shoulder bolt through the hole on either
side of the center hole of the yoke. Secure with
5/16" locknut using a 13 mm wrench. (See Figure 11)
Figure 11
0524 IH-9924