LEXMAN 87554450 Manual De Instrucciones página 113

3. FASTENING
Caution: The roller shutter fixing ends may be different depending on the roller shutter model.
This model of motor is suitable for flat ends or with a circular end of up to 2.4cm. See examples
below.
4
Caution: make sure the roller shutter shaft is aligned with the electric motor, as shown in
the illustration above.
Insert the motor completely into the metal shaft, aligning it as shown in the example
above.
< 12 mm
Using screws, install the fixing bracket
before installing the roller shutter motor
(fixing screws are not included, please use
the appropriate screws for your type of
fixing).
> 12 mm
EN
113