LEXMAN 87554450 Manual De Instrucciones página 119

CODE LEARNING
1) Press the channel
change button.
Choose the desired
channel, the
associated indicator
lights up.
Note: you can pair and control up to 8 roller shutters per remote control channel.
i
Lower the shutter and confirm/finalise the setting of the bottom stop.
DOWN LIMIT SETTING
1) Position the 2) Press the pairing
shutter at the button twice.
desired bottom
limit.
Raise the shutter to its upper position (either via the ENKI application or the remote
control), to set the top limit.
TOP LIMIT SETTING
1) Position the 2) Press the pairing
shutter at the de- button twice.
sired high limit.
Your shutter motor is now installed with the basic settings. For the other settings, follow
the instructions below:
1
2) Press the button 3) Press the pairing
on the motor head button once.
once.
2
3) Press the down
button on the
remote control
once.
2
3) Press the up
button on the
remote control
once.
1
4) The motor will
vibrate.
1
4) The engine
vibrates.
1
4) The engine
vibrates.
5) You can operate
the motor using the
remote control.
EN
5) The bottom
limit is set.
5) The high limit
is set.
119