Descargar Imprimir esta página

Danby DDR050BSPWDB Manual Del Propietário página 16

Ocultar thumbs Ver también para DDR050BSPWDB:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
Fan Speed
Press the button to select the the speed of the fan.
The fan can be set to Low or High.
Note: The fan speed can not be selected in
continuous or comfort mode.
TIMER
Auto Off
1. When the dehumidifier is turned on, press the
timer button to activate the auto off timer.
2. Press the humidity adjust buttons to change the
set time in 0.5 hour increments up to 10 hours
and then in 1 hour increments up to 24 hours.
Auto On
1. When the dehumidifier is turned off, press the
timer button to activate the auto on timer.
2. Press the humidity adjust buttons to change the
set time in 0.5 hour increments up to 10 hours
and then in 1 hour increments up to 24 hours.
WATER REMOVAL
There are three ways to remove collected water
from the appliance.
1. Water Bucket
The dehumidifier will automatically collect
condensed water in the water bucket. When the
bucket is full, the compressor and fan will turn off
and the full bucket indicator light will turn on. The
display will show "P2" and beep 8 times.
To empty the bucket,gently remove it from the
dehumidifier.
1. Pull the bucket out halfway
2. Pull up the handle and lift the bucket up slowly
3. Pour the water out
Notes
• Do not place the water bucket directly on the
floor. The bottom of the bucket is uneven and it
will fall over and spill water.
• Empty the bucket and replace it in the appliance.
The dehumidifier will not function without the
bucket installed.
• Never tamper with or attempt to defeat the
water level float system. Proper installation of the
water bucket is crucial in maintaining reliable
operation.
15

Publicidad

loading