Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
2. Continuous Drain
Water can be removed using the continuous drain with a standard garden hose and female threaded end
(not provided).
Before using any automatic drain functions, check that all drain ports are clean. There is one drain port
inside the bucket compartment of the appliance, remove the bucket to see it. There is one drain port on the
back of the appliance where the female threaded end and garden hose attach. All drain ports should be
cleaned with a pipe cleaner prior to use.
To use the continuous drain you must purchase a garden hose and female threaded end.
The required dimensions are:
• Female threaded end: ID:M=1''
• Garden hose: ID≥Φ5/16''
Remove the plug from the continuous drain outlet and attach the female threaded end and the garden hose
to the back of the appliance. Direct the other end of the garden hose to a bucket or floor drain.
Ensure that the garden hose is not bent and goes straight down from the back of the appliance. The
continuous drain is only activated by gravity so any bends or upward motion in the hose will stop the water
from draining.
The garden hose should be cut so that it is no more than 1.8 m (6 feet) long. If the drain hose is too long
water may not drain completely which can lead to stagnant water and mildew build up inside the hose.
Notes:
• Do not clean the drain ports with anything more rigid than a pipe cleaner as this can damage the
appliance.
• If the drain ports are clogged or dirty it can cause water to leak from the bottom of the appliance.
• The continuous drain is fed by gravity alone.
16
Publicidad
