FujiFilm instax SQUARE Link FI017UJ Manual De Instrucciones página 5

Charging the Battery
Connect the printer with a USB AC adapter (not included with
INSTAX SQUARE LINK printer) using the supplied USB Type-C
cable, then connect the USB AC adapter to an indoor power
outlet.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.
BO17A33001-300_US.indb 5
Plug USB AC
adapter into
an indoor
power outlet
Note that a USB AC adapter is
not included, but is typically
provided with your Smartphone or
otherwise purchased separately.
Charging status indication with the LED
When the printer is turned on:
Indication Charging status
LED lights up in white Not charging or charging is
completed
LED flashes in white Charging
When the printer is turned off:
Indication Charging status
LED is turned off Not charging or charging is
completed
LED flashes in green Charging
Check the charging status with your Smartphone when
connected to the free INSTAX SQUARE LINK App.
EN
5
2022/6/16 14:27:48