Publicidad
Idiomas disponibles
Idiomas disponibles
Printer Care
■ Handling the Printer
•
CAUTION - Do not expose to excessive heat such
as sunshine, fire or the like during use, storage or
transportation. An explosion or leakage of flammable
liquid or gas could result. Also, ensure proper disposal in
accordance with the instructions below.
•
CAUTION - Do not remove or attempt to remove
the lithium battery. Without limitation, do not expose
or attempt to expose the printer or the lithium battery
to fire or a hot oven. Do not attempt to damage,
mechanically crush or cut the lithium battery, as an
explosion could result.
•
CAUTION - Do not subject to extremely low air
pressure at high altitude. An explosion or the leakage of
flammable liquid or gas could result.
■ Printer Care
1. Do not open the film door until you have used up the
the loaded INSTAX SQUARE instant film pack. Doing
so will expose the remaining film and the film can no
longer be used.
2. Your printer is a precision instrument. Do not get it wet
or drop it. Also, do not expose it to sand, dust or dirt.
3. Do not use cleaning products or solvents such as those
with bleach or alcohol to remove dirt. Wipe with a damp
cloth if and as necessary.
4. Keep the film chamber and printer interior clean to avoid
damaging the film.
5. In hot weather, do not leave your printer in hot places
such as in a car or on the beach. Do not leave it in damp
places or places where weather exposure could result.
BO17A33001-300_US.indb 9
6. Moth repellent gas such as naphthalene may affect your
printer and photo prints. Store your printer and photo
prints in a place where exposure to harmful cleaning or
other household elements will be avoided.
7. Note that the temperature range within which your
printer can be used is 41°F to 104°F (5°C to 40°C).
8. Take great care to ensure that your photo prints do
not violate copyright, image rights, privacy or other
personal rights and do not offend public decency.
Actions that violate the rights of others, that are contrary
to public decency, or that constitute a nuisance may be
punishable by law or otherwise legally actionable.
9. This printer is designed for personal/household and
limited commercial use. Download the free App to your
Smartphone.
■ Charging the Battery
The battery is not charged at shipment. Charge the battery
completely before use.
Charge the battery using the supplied USB Type-C cable and
the USB AC Adapter from your Smartphone. Charging times
will increase at ambient temperatures below 50°F (10°C)
or above 95°F (35°C). Do not attempt to charge the battery
in environments with temperatures above 104°F (40°C); at
temperatures below 41°F (5°C), the battery will not charge.
■ Battery Life
At normal temperatures, the battery can be recharged
about 300 times. A noticeable decrease in the length of time
the battery will hold a charge indicates that it has reached
the end of its service life.
CAUTION - Handling the Battery
The battery and printer body may become warm to the
touch after extended use. This is normal.
EN
9
2022/6/16 14:27:49
Publicidad
