Publicidad
Idiomas disponibles
Idiomas disponibles
Turning on/off the Printer
Press and hold the Power button for approximately 1 second to
turn the printer on or off.
The LED lights up when the printer is turned on.
If the printer remains idle without operation for 5 minutes, the
printer turns off automatically.
Checking the Printer Status with the LED
You can check the printer status with the LED.
Color
LED status
Blue
Flashing
Purple
Flashing
Yellow (The
Lights Up
printer will be
turned off after
3 seconds.)
Yellow
Flashing
BO17A33001-300_US.indb 7
The last image printed can be reprinted by pressing and
holding the function button for 2 seconds.
Note
When you turn off the printer, you will not be able to reprint
the image you last printed after you turn the printer back
on. However, you will be able to print the image from the
INSTAX SQUARE LINK App.
Status
Firmware is being updated
Reprinting
Low battery state
Film ejection error occurred
Reprinting an Image
EN
7
2022/6/16 14:27:49
Publicidad
