homeTro HT1 Manual De Usuario página 17

Condition/Problem
Electronic watch will
not turn on/start
Electronic watch
shuts off while in use/
No data displayed on
electric watch
Bike rocks/does
not sit level
Pedals loose
Noise occurred
when pedaling/unit
difficult to pedal
Seat post movement
Troubleshooting
Things to Check
Batteries
Check data
cable integrity
Check data cable
connections
Check magnet position
(requires chain guard
door removal)
Check stabilizer foot
Check surface under
unit
Check pedal to crank
connection
Check crank to axle
connection
Check pedal to crank
connection
Check chain tension
(requires chain guard
door removal)
Check locking pin
Check adjustment knob
US/UK
Make sure batteries are installed
correctly.
If batteries are correctly installed,please
replace with a set of new batteries.
All wires in cable should be intact. If any
cable are cut or crimped,please
replace it.
Be sure cable is connected securely.
Magnet should be in place on
sprocket drive.
Stabilizer foot may be turned in or
out to level bike.
Adjustment may not be able to
compensate for extremely uneven
surfaces. Move bike to level area.
Crank should be tightened
securely to axle.
Remove pedals. Make sure there is
no debris on threads, and the
reinstall the pedals.
Please contact customer service
for operating video
Open chain guard door to see the
chain. Tension should not be too
loose(nor too tight).
Be sure adjustment pin is locked into
one of the seat post adjustment holes.
Be sure knob is securely tightened.
15
Solution