homeTro HT1 Manual De Usuario página 8

1. Electric Watch Display
Specifications
TIME 00:00-99:59 Min/Sec
SPD 0.0-99.9
DST 0.00-99.99
ODO 0.00—999.9 Km
CAL 0.0-999.9
2. Key Function
◆ Press the key to switch on the display.
◆ When "SCAN" flashes, each function will be displayed one by one in turn. At this time, press
the key, "SCAN" will disappear, and stop displaying in turn, and enter into the lock mode to fix
on a certain function, and then you can press the key to select the function you want to display.
3. Cautions
◆ When the movement is stopped and there is no key operation within 4 minutes, the
◆ The electronic meter will turn on automatically when there is motion sensing or key
electronic meter will turn off automatically.
◆ Press and hold for 2 seconds to clear the data of the electronic watch.
operation.
NOTICE: 2 AAA batteries is needed(Package not Included). Make sure that the batteries
point in the direction of the +/- indicators in the battery bay.
Electric Watch Display
Display Data
Km/h
Km
Kcal
US/UK
Press the MODE key until the pointer advance to
TIME. The total working time will be shown.
Press the MODE key until the pointer advance to
SPEED. The working speed will be shown.
Press the MODE key until the pointer advance to
DISTANCE. The distance or each workout will be
displayed.
Press the MODE key until the pointer advance to
ODOMETER. The odometer will be displayed.
Press the MODE key until the pointer advance to
CALORIES. The calories burned will be displayed.
6
Functions