DeWalt DW448 Manual Del Usuario página 21

• Make sure the disk or wheel rotates in the direction
of the arrows on the accessory and the tool.
Switching ON and OFF (fig. A & G)
The ON/OFF-switch (1) of your Angle Grinder is
equipped with a lock-off button (2) to avoid
unintentional starting of your tool.
• To run the tool, unlock the tool by pressing the
lock-off button (2) and press the ON/OFF-switch.
• For continuous operation, press the lock-on
button (3) and release the ON/OFF-switch.
• To stop the tool, release the ON/OFF-switch.
To stop the tool in continuous operation, press
the ON/OFF-switch once more.
Do not switch the tool ON or OFF when
under load.
Sanding with the backing pad (option)
• Mount the backing pad with abrasive disk as
described above.
• Only a segment of the disk should
contact the workpiece when sanding.
• Do not exert excessive pressure on the
abrasive disk.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
DW451(K) & DW458(K) - Carbon brushes
The red LED (7) on top of the tool lights up under
no-load condition when the carbon brushes are
nearly worn out. After approx. 10 hours of use the
motor will automatically be shut off. Take your tool to
an authorized D WALT repair agent.
E
Lubrication
Your Power Tool requires no additional lubrication.
19
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized D
where it will be disposed of in an environmentally safe
way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the
performance of your D
it within 30 days, complete as purchased, to a
participating Dealer, or an authorized D
repair agent, for a full refund or exchange. Proof
of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your
D WALT tool, in the 12 months following purchase,
E
it will be undertaken free of charge at an authorized
D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for
Power Tools. Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due
E
to faulty materials or workmanship within 12
months from the date of purchase, we guarantee
to replace all defective parts free of charge or, at
our discretion, replace the unit free of charge
provided that:
• The product has not been misused.
• Repairs have not been attempted by
unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit
and is additional to consumers statutory rights.
For the location of your nearest authorized
D WALT repair agent, please use the appropriate
E
telephone number on the back of this manual.
E N G L I S H
WALT repair agent
E
WALT tool, simply return
E
WALT
E
en - 6