EN
LEGIONELLA BACTERIA FUNCTION
Legionella are small rod shaped bacteria which are a natural constituent of all fresh waters. Legionaries' disease
is a pneumonia infection caused by inhaling of Legionella species. Long periods of water stagnation should be
avoided; it means the water heater should be used or flushed at least weekly.
The European standard CEN/TR 16355 gives recommendations for good practice concerning the prevention of
Legionella growth in drinking water installations but existing national regulations remain in force.
This electro-mechanical storage water heater is sold with a thermostat set at a temperature higher than 60°C;
it means it is enabled to carry out a "thermal disinfection cycle" to restrict the Legionella growth inside the tank.
Warning: when this software has been carrying out the thermal disinfection treatment, water temperature can
cause burns. Feel water before bathing or showering.
TECHNICAL CHARACTERISTICS
For the technical specifications, refer to the nameplate (the nameplate is located next to the water intake/outlet
pipes).
Product range
Weight (kg)
Installation
Vertical
Model
Qelec (kWh)
Load profile
L
15 dB
wa
36,0%
wh
V40 (l)
Dispersed power (W)
Capacity (l)
The power consumption data in the table and the other information given in the Product Fiche (Annex A to this
manual) are defined in relation to EU Directives 812/2013 and 814/2013.
Products which do not have the label and Product Fiche required for boiler/solar power configurations pursuant
to regulation 812/2013 may not be used in such installations.
Products equipped with regulator knobs have a sealing label which prevents the knob being rotated and fixes
it at its set <out-of-the-box-mode> position shown in the Product Fiche (Annex A), used by the manufacturer to
declare the appliance's energy class.
This appliance is conforming with the international electrical safety standards IEC 60335-1 and IEC
60335-2-21. The CE marking of the appliances attests its conformity to the following EC Directives, of
which it satisfies the essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
- RoHS2 Risk of Hazardous Substances: EN 50581.
- ErP Energy related Products: EN 50440.
This product is in conformity with REACH regulations.
14
Table 1 - Product information
50
65
16
18,5
Vertical
Vertical
6,688
6,680
6,678
M
M
M
15 dB
15 dB
36,0%
36,0%
65
70
85
-
-
-
49
65
75
80
21
23
Horizontal
Horizontal
HWST
Thermoelectric
Refer to the nameplate
6,687
6,685
M
M
15 dB
15 dB
36,0%
36,0%
70
70
-
-
63
75
75
74
100
24
Vertical
Horizontal
-
12,867
6,683
-
L
M
-
15 dB
15 dB
-
37,0%
36,0%
-
130
80
-
-
95
95
26
HWST
-
-
-
-
-
67,49
94