SILKO ALI SNACK EFG6 Serie Instrucciones Para Instalación, Uso Y Mantenimiento página 44

16 REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPONENTS.
• Disconnect the appliance electrical power supply, if present,
before proceeding with any operation.
• After replacing a gas system component, check for gas leaks
at connection points.
• After replacing an electrical system component, check it is
correctly wired.
Replacing the oil drain tap
• Remove the control panel.
• Remove the bottom of the appliance.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
GAS FRYERS
Replacing the gas valve and safety thermostat.
•
• Remove the control panel.
• Remove the bottom of the appliance.
• Unscrew the locking nut in the well.
• Remove and replace the component.
• Change the sensor/bulb sealing O-ring in the well.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the burner, the pilot burner, the thermocouple,
the piezoelectric ignition and the igniter.
• Remove the control panel.
• Remove the bottom of the appliance.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRIC FRYERS
Replacing the working thermostat and safety thermostat.
•
• Remove the control panel.
•
• Release the thermostat bulb to be replaced; it is secured
• Disconnect the electrical connections to other devices.
• Remove and replace the component.
• Change the sensor/bulb sealing O-ring in the well.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the heating element
•
• Remove the control panel and the cover protecting the wiring
of the heating elements.
• Release the thermostat bulbs secured between the heating
elements.
• Disconnect the electrical connections to other devices.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
10
17 CLEANING THE INTERIOR
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
18 MAIN COMPONENTS
GAS FRYERS
• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
• Safety thermostat
ELECTRIC FRYERS
• Safety thermostat
• Working thermostat
• Heating element