Step 18
å
Carefully stand your unit upright.
å
Insert the DOOR STOPS (4I) into the holes in the UPPER SHELF (K).
å
Before you begin fastening the BARREL END of the DOOR SLIDE (37M)
to the LEFT END (B2), you must insert the DOOR (T) at an angle placing
the DOOR HANGERS on the DOOR behind the BARREL ENDS on the
DOOR SLIDES. Push the door into the unit horizontally.
å
While holding the DOOR, swing the DOOR SLIDE (37M) up into place
and fasten it to the LEFT END (B2). Use one BLACK 9/16" LARGE
HEAD SCREW (1S).
å
Repeat this step to hang the other DOOR (T).
After the door is in the
unit horizontally, swing the
DOOR SLIDE (37M) up and
fasten the Barrel end with
one BLACK 9/16" LARGE
HEAD SCREW (1S).
Barrel end
4I
www.sauder.com/service
T
37M
B2
K
427022
BLACK 9/16" LARGE HEAD SCREW
(2 used for the DOOR SLIDES)
T
37M
F
1S
Page 23