Sauder Portage Park 426294 Instrucciones De Montaje página 16

Step Step 11
å
Place your unit in its final location.
å
1 - Use the FURNITURE TIPPING RESTRAINT KIT (96) for added stability. Fasten the SAFETY STRAP to the TOP (A)
st
using the SHORT SCREW.
å
The following instructions show your unit being fastened to a wall stud. If you are not fastening your unit to a wall stud,
go to the next step now.
å
2 - Locate the center of a stud in your wall near your unit and mark it with a pencil.
nd
å
3 - Drill a 1/8" hole on the mark and into the stud in your wall.
rd
å
4 - Fasten the unit to the wall. Use the LONG SCREW through the other end of the SAFETY STRAP and into the 1/8" hole.
th
Mark and drill
a 1/8" hole into
the wall stud.
2
nd
Use the short screw
through the hole in the
strap and into the TOP.
96
Page 16
Electric drill with 1/8" bit
3
rd
4
th
1
st
www.sauder.com/service
A
426294