Descargar Imprimir esta página

GreenWorks MO60L810 Manual Del Operador página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

• KEEP WATER AWAY FROM BATTERY COMPARTMENT WHILE WASHING TO AVOID DAMAGING THE
ELECTRICAL COMPONENTS.
• DO NOT CLEAN WITH ALCOHOL, GASOLINE, ACETONE, OR OTHER CORROSIVE/VOLATILE
SOLVENTS. THESE SUBSTANCES MAY DAMAGE THE EXTERNAL AND INTERNAL STRUCTURE OF
YOUR MOWER.
• DO NOT RUB WITH SANDPAPER OR METAL BRUSH.
5.4
CLEAN THE BATTERY AND BATTERY CHARGER
DO NOT CLEAN THE BATTERY OR THE BATTERY CHARGER WITH WATER.
• Make sure that the battery and the battery charger and battery compartment are all clean and dry before
you insert the battery into the battery charger.
• Clean the battery terminals with a soft and dry cloth.
• Clean the surface of the battery and the battery charger with a soft and dry cloth.
5.5
EXAMINE THE CUTTING EQUIPMENT
TO PREVENT ACCIDENTAL START, ALWAYS REMOVE THE BATTERY AND WAIT FOR AT LEAST 5
SECONDS.
WEAR HEAVY-DUTY PROTECTIVE GLOVES WHEN PERFORMING MAINTENANCE ON THE CUTTING
EQUIPMENT. THE BLADE IS SHARP AND INJURIES CAN EASILY OCCUR.
Note: Make sure that both handlebar shafts are properly inserted into the mounting holes at the base of the
mower. Ensure the shafts are in the same position.
• Examine the cutting equipment for damage or cracks. Always replace damaged cutting equipment.
• Inspect the blade to see if it is damaged or blunt.
5.5.1
REPLACE THE BLADES
SECURELY LOCK THE BLADES IN PLACE USING A WOODEN BLOCK TO PREVENT ANY POTENTIAL
HARM TO YOUR FINGERS WHEN REPLACING THE BLADES. THE BLADES CAN BE MOVED WHEN THE
MOTOR IS OFF AND FINGERS CAN BECOME TRAPPED BETWEEN THE BLADES AND STATIONARY
PARTS.
Remove the Used Blades
1.
Secure the blade using a wooden block for stabilization.
English
CAUTION
WARNING
WARNING
WARNING
WARNING
15
EN

Publicidad

loading

Este manual también es adecuado para:

Lmc40001