Carson Reflex Wheel Pro Instrucciones página 25

Fail Safe Function Setting
1. Set the throttle and the steering wheel to the
normal position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver
should start flashing.
Binding the Transmitter and Receiver
1
1. Turn on the receiver power.
Press the "SW" switch. The
receiver's LED should start
flashing.
ATTENTION
Keep the transmitter and receiver not over
40 cm apart when setting and binding.
CARSON Reflex Wheel Pro LCD 2,4 GHz 50 050 0033
All manuals and user guides at all-guides.com
4. Put the throttle trigger at the brake position,
5. For electric models, put the throttle trigger at the
2
2. Turn on the
transmitter.
press the "F/S SET" button, the LED should
become solid.
stop position when you are making the failsafe
setting.
3
3. When the LED on the receiver
becomes solid, the binding
process is completed. The RC
system is ready.
GB
25