Publicidad
Idiomas disponibles
Idiomas disponibles
Timer Control
You can use the timer in two different ways:
a) You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the
set time is up.
b) You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99 min.
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone.
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you're not selecting any cooking zone.
3. Set the time by touching the "-" or "+" control
of the timer.
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the
timer to decrease or increase by 10 minutes.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5
seconds.
b) Setting the timer to turn one cooking zone off
Set one zone
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 3#)
2. Touch "+" the controls of the timer. The minder
indicator will start flashing and "10" will show
in the timer display.
4. Touching the "-" and "+" together, the timer is
cancelled, and the"00" will show in the minute
display.
6. Buzzer will beep for 30 seconds and the timer
indicator shows "- - " when the setting time
finished.
2. Touch timer control, the minder indicator will
start flashing and "10" will show in the timer
display.
21
Publicidad
