Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
1. Touch
to power on.
Your circulator returns to last
saved memory setting.
2. Select desired speed by
-/+
pressing
. Press and hold
-/+
to adjust speed up or down
quickly. Speed is indicated by
number shown on the display
(1-99).
3. Press
to activate timer. The
illuminates and display
0
flashes
to indicate Timer
Adjustment Mode. While in this
mode, select amount of time in
one-hour intervals by pressing
-/+. After three seconds,
flashing stops and display
shows hours to indicate timer is
set. The display returns to the
last speed selected. Touch
to quickly tell how many hours
are remaining on the timer.
8
English
4. To cancel timer, press and hold
for 4 seconds or press
0
and the
display shows
white.
5. Press
to turn Oscillation on
and off.
-
until
is
TIMER
OSCILLATION
DISPLAY
POWER ON/OFF
SPEED / TIMER
ADJUSTMENT (-/+)
Publicidad
