Medion LIFE X14308 Manual De Instrucciones página 174

.. Common Interface
If you want to watch subscription channels, you must first
register with the channel provider. Once you have regis-
tered, you will receive a Conditional Access Module (CAM
module) and a special card from your provider. You will
find information about the settings in the documentation
supplied with the module.
Install the CI components on your television in the follow-
ing way:
 First insert the CAM module in the slot on the side of
the LCD TV. Then insert the card.
 Connect the television to the power supply, switch it
on, and wait for a moment until the card is recognised.
.
Please note that you can only insert or remove
the CI module when the device is in STANDBY
mode, or has been disconnected from the
mains power.
The CAM module must be inserted correctly:
it cannot be inserted if it is the wrong way
round. The CAM module or the television
could be damaged if you attempt to insert the
CAM module by force.
.. Connecting the power supply
 Connect the mains plug on the device to an easily ac-
cessible 220 to 240 V ~ 50 Hz mains socket.
.. Switching the Smart TV on and off
 The device will be in standby mode as soon as you
have connected the mains plug to the mains socket.
 To switch on the device, press
– on the remote control: the standby/on button
– on the device: the
 Use the standby/on button on the remote control to
switch the device back into standby mode. The device
will be switched off, but will continue to use power.
.. Switching on the device for the
fi rst time
Your device will be in installation mode when you switch it
on for the first time.
Menu option
SELECT LAN
Select the desired language and con-
GUAGE firm by pressing the O K button.
Then select whether you want to set
SET UP ON
up the device using a mobile device
MOBILE /
(using the QR code) or using the tel-
SET UP ON
evision. Press O K to confirm your
TV
selection.
12
button.
Setting
Menu option
CONNECT
A LAN Internet connection is automat-
TO THE IN
ically established as soon as the device
TERNET is connected via a LAN cable. If no
LAN cable is connected, the available
WLAN networks are displayed. Use
the  buttons to select the desired
WLAN connection and press the O K
button to confirm the selection. Then
enter the required password to estab-
lish the connection.
SELECT LO
Select the required country. Confirm
CATION your selection by pressing the O K
button.
ENTER
Please enter the required postcode.
POSTCODE
(optional)
TERMS &
The use of your device is subject to an
CONDI
end-user licence agreement. Without
TIONS,
this agreement in place, all the smart
PRIVACY
features will be disabled. The different
POLICY types of smart features can be ena-
bled/disabled individually. Click on the
relevant box to accept the applicable
privacy policy and user terms and con-
ditions.
CREATE This option allows you to connect your
YOUR
device to a VIDAA account. A VIDAA
VIDAA AC
account must be set up for the VIDAA
COUNT
VOICE voice control.
SELECT Select the desired voice control AMA
VOICE SER ZON ALEXA or VIDAA VOICE here.
VICE
NAME TV
You can give your television a name
here so that it can be identified when
making further configurations with
other devices. Select one of the prede-
fined names or assign a name of your
choice.
This completes the initial installation of the device. You
can now open the Netflix app directly, call up the Home
screen or switch to TV mode. Select WATCH LIFETV to
search for television channels.
Setting