Medion LIFE X14308 Manual De Instrucciones página 177

– MOTOR MOVEMENT
Set the type of motor movement for the sat-
ellite system here. Select CONTINIOUS or
STEP. If you select the movement in steps set-
ting, you can then specify the step size using
the virtual keyboard.
– STOP ON SIGNAL
Select whether the motor movement is to stop
when a signal is received (ON/OFF).
– GO TO REFERENCE
You can enter a reference here to search for
signals.
UNICABLE
Select the desired Unicable setting from the available pre-
sets. The following settings can be configured under the
USER DEFINED option.
– UNICABLE MODE
Select STANDARD or JESS mode
– USER BAND
Select the desired BAND   .
– FREQUENCY BAND
Use the virtual keyboard to enter the frequen-
cy band.
If you press the  button with one of these options, the
following options will be available.
– SATELLITE AUTO DETECT
Start automatic satellite detection.
– UNICABLE A
Select the desired satellite for the single-cable
distribution system A.
– UNICABLE B
Select the desired satellite for the single-cable
distribution system B.
– ANTENNA SETUP
Under ANTENNA SETUP you can configure
the following settings.
SATELLITE
This shows the satellite of the corresponding
single-cable distribution system.
LNB FREQUENCY
Select the desired LNB frequency for the selec-
ted satellite.
TONE KHZ
For this option, select OFF, BAND or POSI
TION.
If you press the  button with one of these
options, the following options will be availa-
ble.
SATELLITE
Select the desired satellites for the correspon-
ding single-cable distribution system here.
CHANNEL
Select ALL CHANNELS or FREE CHANNELS
here. This option may not be available depen-
ding on the country/region/provider.
SEARCH MODE
Select the desired search mode FREQUENCY
SCAN or QUICK SCAN.
 Then press the  button to start the scan.
 Select STOP to cancel the process.
 Confirm with DONE to complete the process.
 Select RESCAN again to start a new channel search.
.. Displaying information
1 Das Erste HD
ZDF-Morgenmagazin Tagesschau
05:30 09:00 09:00 — 09:05
 Press the  button to display information about the
current channel. You receive the same information
when you switch over to a different channel.
 If you then press the O K button, a description of the
current TV programme is displayed (if available). You
can also select the following programmes of the cur-
rent channel beforehand using the  button and call
up these descriptions with O K . You can scroll through
the text using the  buttons.
 If you call up the description of the desired pro-
gramme, you can schedule recordings and reminders
for this programme. You will find more detailed infor-
mation about this in the "PVR recording" section on
page 18.
. TV menu
When you have set up TV reception and are in TV mode,
you can call up the TV menu by pressing the
You can use the  buttons to select the options. Open
the menu with the O K button.
.. Channel list
When the TV is in use, press the O K button to open the list
of channels.
Antenna
1 Das Erste HD
Live nach Neun
2 ZDF HD
Volle Kanne - Service täglich
3 3Sat HD
Kulturzeit
4 arte HD
Auf den Spuren der ersten Amer...
5 KiKA HD
Babar und die Abenteuer von B...
6 phoenix HD
phoenix plus
7 tagesschau24 HD
Tagesschau-Nachrichten
Press to add FAV or Home
 You can use the  buttons to select the channels
listed and press O K to open.
 If you press the  button, you can configure the fol-
lowing settings:
ANTENNA / CABLE / SATELLITE: Select the desired
•
channel list for antenna, cable or satellite reception
FAV    : Open the favourites lists 1-4
•
22.03.2023 08:30
Antenna DTV
Live nach Neun
EN
09:00 — 09:05
button.
DTV
15