GYS SMART HUB MODULE Manual De Instrucciones página 10

Operating manual
SAFETY INSTRUCTIONS
This user manual includes operation instructions, and the
safety precautions to be followed by the user. Please read it
carefully before first use and keep it for future reference. These
instructions must be read and fully understood before use. Do
not carry out any alterations or maintenance work that is not
directly specified in this manual. The manufacturer shall not be
liable for any damage to persons or property resulting from use
not in accordance with the instructions in this manual. If you
have any problems or queries, please consult a qualified person
to correctly operate the equipment. This device may only be
used for ticket printing and/or data transmission within the limits
indicated on the device and manual. The safety instructions
must be followed. The manufacturer cannot be held responsible
in the event of improper or dangerous use.
The device is designed to be used indoors. Must not be exposed
to the rain.
Do not use the charger if the mains cable or plug is damaged.
Do not place the unit near a heat source, direct sunlight or
continuously high temperatures (above 50 °C).
This machine must be connected to an earthed socket.
Maintenance
• Maintenance should only be carried out by a qualified person.
• Warning! Always disconnect from the mains before carrying
out maintenance on this machine.
• Never use solvents or other aggressive cleaning agents.
• Clean the surfaces of the unit with a dry cloth.
Regulations:
• Equipment complies with European directives
• The Declaration of Conformity is available on our website.
• The Eurasian Economic Community (EAEC) mark of conformity.
• This equipment conforms to UK requirements.
• The UK Declaration of Conformity is available on our website
(see cover page).
• This device complies with Moroccan standards.
• The C‫( م‬CMIM) declaration of conformity is available on our
website.
Disposal:
• This machine is subject to selective collection. Do not dispose
of in domestic waste.
10
Translation of the original
instructions
SMART HUB MODULE