Publicidad
Idiomas disponibles
Idiomas disponibles
INTERNAL WATER DISPENSER
The water dispenser is located on the left wall inside
the refrigerator.
To dispense water:
1. Hold the glass against the pad.
2. Keep the glass underneath the dispenser for 2-3
seconds after releasing the pad. Water may continue to
dispense after pad is released.
If no water is dispensed when the refrigerator is first
installed, there may be air in the water line system. Press
the dispenser pad for at least 5 minutes to remove trapped
air from the water line and to fill the water system. To
flush out impurities in the water line, throw away the first 2
gallons (7.6 liters) of water.
NOTE: To avoid water deposits, the dispenser should be
cleaned periodically by wiping with a clean cloth or sponge.
49-1000709 Rev. 1
(On Some Models)
Water Dispenser
15
Publicidad
