Beper 90.470 Manual De Instrucciones página 13

Food processor Use instructions
How to use the appliance
1. Clean all the parts before using the product for the first time.
2. Before inserting the cup to the housing, make sure the power cord is unplugged from
the power outlet and the knob is in "0" position.
3. Care is needed when handling cutting blades, especially when removing the blade from
the bowl, emptying the bowl and during cleaning.
4. To chop food into strip, place the blade tray of strip to the rotor. Place the prepared food
into the cup and set the selector to the desired speed, turning it clockwise. Press the cup
cover downward the cup until the food is completely chopped.
5. To chop food into the piece, place the blade tray of pieces(the inverse of the strip blade) to the
rotor. Operated as the same of point 3.
6. To chop the food to broken, place the stainless steel blad to the rotor. Operated as the same of
point 3.
7. To mix the food, place the plastic mix blad to the rotor. Operated as the same of point 3.
8. After using, please turn off the switch then unplug the power cord from the wall outlet. And clean
all the appliance parts.
Before using the appliance, please reference this table:
Function Fittings
Strip Blade tray(1 a)
Piece the inverse blade tray(2 b)
Mix Stainless steel blade
Mix Plastic blade
Notes:
- The appliance is only permitted to use 1 min for 1 time. Before it's used again, it must cool down
enough.
-Turn the knob (Speed Selector) to "0" position once the appliance is completed and unplug the
cord from the wall outlet.
Cleaning
1. Unplug the appliance from wall outlet before cleaning.
2. After using, detach the subassembly, clean with detergent. Do not use abrasive products. Not
dishwasher.
Food
radish, potato
radish, potato
radish
onion
soup
13
Maximum quantity
300g
300g
300g
300g
Maximum scale