Publicidad
Idiomas disponibles
Idiomas disponibles
Cart assembly
MULTIFUNCTION FLOODLIGHT TOWER
1.
Remove the cart from the carton box.
2.
Install the handle bar to the cart. Insert the handle bar with washer (a) into the cart
as shown below.
Note: Observe the orientation of the handle as it is installed into the cart.
3.
Connect the axle and handle bar; secure with the lock washer and screw M8 X 20
from hardware parts (4).
Note: (a) Flip the cart horizontally to have a better access to the axle bar.
(b) Apply Loctite 263.
(c) Tighten to a torque of 25Nm
en
STELLA
15
Publicidad
