Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of the
Generator
MULTIFUNCTION FLOODLIGHT TOWER
Note: example for GEEL3.
1.
Remove the generator from the carton box.
2.
Install the generator to the cart. Secure the generator with 2 pieces of screws M8x25
and 2 pieces of screws M8x40 and 8 pieces of Lock Washer D8.4 and 4 pieces of
nuts M8 from hardware parts (2). Ensure that the generator is in the center of the
machine.
Note: (a) Top: Bolt and washer.
(b) Underneath: Nut and washer.
(d) The recoil in facing outside (for GEEL3 only).
3.
Position the generator to the cart.
Note: Refer to the arrow for the position of the generator for GEEL3.
en
STELLA
17
Publicidad
