en
24
STELLA
1.
Check winch cables (a) for wear or damage, and make sure they are resting
properly in pulleys. Do not use the Light Tower if either winch cable is damaged.
2.
Secure the machine by engaging the wheel stopper (b) and deploying the
stabilizers (c).
WARNING!
Pinching/crushing hazards. Moving parts can crush or cut extremities. Keep hands and
fingers clear of pinch points when raising the tower.
NOTICE: While raising the tower, pay close attention to the coil cord and make sure that
it does not tangle or become caught on any part of the machine.
3.
Rotate the winch handle until tower is at the desired height. Do not over crank the
winch when the tower is fully extended.
MULTIFUNCTION FLOODLIGHT TOWER