Publicidad
Idiomas disponibles
Idiomas disponibles
6
OPERATION
6.1 PREPARING THE MACHINE FOR FIRST USE
Procedure
6.2 ADJUST THE LIGHTS
Overview
Remenber
en
22
STELLA
Realice el procedimiento indicado a continuación para preparar el equipo.
1.
Make sure all loose packaging materials have been removed from the machine.
2.
Check the machine and its components for damage. If there is visible damage, do
not operate the machine! Contact your ENAR dealer immediately for assistance.
3.
Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4.
Attach component parts not already attached.
5.
Move the machine to its operating location.
Each light fixture can be aimed up, down, left or right. Position each fixture by loosening
toolless light adjusters (a) and aiming the light up or down. DO NOT loosen the inside nut
(b). Loosening this nut could cause damage to the light fixture. Light fixtures can be
turned left and right without loosening any nut or adjusters. Tighten adjusters after
positioning the lights..
Always return the light fixtures to aim at the ground when transporting the machine.
MULTIFUNCTION FLOODLIGHT TOWER
Publicidad
