Publicidad
Idiomas disponibles
Idiomas disponibles
7.5 LONG TERM STORAGE
Introduction
When
Procedure
Procedure
en
28
STELLA
Extended storage of equipment requires preventative maintenance. Performing these
steps helps to preserve machine components and ensures the machine will be ready for
future use.
While not all of these steps necessarily apply to this machine, the basic procedures
remain the same.
Prepare your machine for extended storage if it will not be operated for 30 days or more.
Perform the procedure below to prepare your machine for storage.
1.
Complete any needed repairs.
2.
Grease all fittings and, if applicable, repack bearings.
Perform the procedure below to store your machine.
1.
Move the machine to a clean, dry, secure storage location. Block or chock wheels to
prevent machine movement.
2.
Use touch-up paint as needed to protect exposed metal against rust.
3.
If the machine has a battery, either remove or disconnect it.
NOTICE: Allowing the battery to freeze or completely discharge is likely to cause
permanent damage. Periodically charge the battery while the machine is not in use. In
cold climates, store and charge the battery indoors or in a warm location.
4.
Cover the machine. Tires and other exposed rubber items should be protected from
the weather. Either cover them or use a readily available protectant.
MULTIFUNCTION FLOODLIGHT TOWER
Publicidad
